v2.10.1.0 of 15.02.2018

added support for a new memory chip
fixed non-critical bugs
 

v2.9.0.0 of 05.06.2016

Digital channel level measurement bug fixed: level was measured with -1.8 dB inaccuracy
 

v2.8.0.0 of 17.10.2016

TCP/IP connection bug fixed: in some cases device connection with SNMP or ViewRSA monitoring system breaks during a long operating time. Connection could only be reestablished after rebooting the device
Hardware errors alarm bug fixed: the device generates Clock hardware error alarm in ViewRSA and SNMP trap on startup
WEB interface functionality improved: SNMP node 'testPointName' can be set in the device WEB-interface. Test point name is a description of the signal being monitored. You can see it in the SNMP 'testPointName' node and in the device WEB interface page header
 

v2.6.0.0 of 17.06.2016

fixed non-critical bugs
 

v2.5.0.0 of 19.05.2016

Level measurement bug fixed: in some cases signal with level of approximately 70 dBuV was measured with extra +10dB inaccuracy
DVB-C/QAM128 channels synchronization bug fixed: channels with central frequency higher than 700 MHz were failed to synchronize
 

v2.4.0.0 from 18.01.2016

Fixed error connection with the program ViewRSA, if the devices are on
  different subnets

 

 

v2.2.0.0 от 17.09.2015
 

Fixed level measurement in continuous operation
Fixed BER measurement on channels Annex B
 

v2.1.0.0 от 15.08.2015

Fixed periodic reboot
Increased the number of variables at the same time requested via SNMP
 

v2.0.0.0

Initial revision